http://bestwaterfilter1.com/refrigerator-install-of-water-dispenser-tube.htm Water Filter Systems - House Water Filters Fri, 06 Jan 2012 02:53:36 +0000 hourly 1 http://wordpress.org/?v=3.3.1 http://bestwaterfilter1.com/refrigerator-install-of-water-dispenser-tube.htm/comment-page-1#comment-6348 potheadplumber Fri, 15 Jan 2010 05:23:59 +0000 http://bestwaterfilter1.com/refrigerator-install-of-water-dispenser-tube.htm#comment-6348 tighten the packing nut it the nut that the stem from the handle passes through about a quarter to a half a turn should be enough don't forget to hold the pipe the saddle valve is attached to for support while tightening tighten the packing nut it the nut that the stem from the handle passes through about a quarter to a half a turn should be enough don’t forget to hold the pipe the saddle valve is attached to for support while tightening

]]> http://bestwaterfilter1.com/refrigerator-install-of-water-dispenser-tube.htm/comment-page-1#comment-6349 smakswac Fri, 15 Jan 2010 05:23:59 +0000 http://bestwaterfilter1.com/refrigerator-install-of-water-dispenser-tube.htm#comment-6349 If the leak comes from the nut attached to the fitting first try tightening it just a little more always use two wrenches one for the nut and one for the fitting.If that doesn't work use one or two wraps of Teflon tape.If its leaks from around the tubing you will need a new Ferrell its the ring that's pressed around the tubing. On the inside of the fitting. If the leak comes from the nut attached to the fitting first try tightening it just a little more always use two wrenches one for the nut and one for the fitting.If that doesn’t work use one or two wraps of Teflon tape.If its leaks from around the tubing you will need a new Ferrell its the ring that’s pressed around the tubing. On the inside of the fitting.

]]>